石英亚沸蒸馏器蒸馏浓缩富集FAAS法同时测定自来水中的铅和镉

把分析测试工作中常用来制备高纯水的石英亚沸蒸馏器用于浓缩富集自来水中的铅、镉,并用火焰原子吸收光谱法对铅、镉进行测定.     

As+注入硅的紫外-可见椭圆偏振光谱

本文采用椭圆偏振光谱法研究了剂量为1×10¹⁶—3×10¹²cm^-2的As⁺注入硅,及其在700℃退火后的光学性质。得出:当As⁺注入剂量增大到某一程度后,便呈非晶特性。低于临界剂量的样品,其n-λ,ε₂-λ关系曲线随剂量的增大而往下方移动,呈有规律变化;退火后,在大于4000?波段,n-λ与ε₂-λ曲线基本恢复到单晶硅状态。但在小于4000?的紫外区却未完全恢复,注入剂量越大,偏离单晶硅就越大。并指出,紫外光区是离子注入硅的信息敏感区;用有效质量模型计算出注入剂量与损伤度的关系。计算结果与实验符合得较好。 关键词：     

Self-assembly of Carboxyl Functionalized Polystyrene Nanospheres into Close-packed Monolayers via Chemical Adsorption

The polyacrylic acid functionalized polystyrene nanospheres were synthesized and self-assembled into irregular, densely packed monolayers in non-aqueous media. The polymer nanoparticles were chemically adhered to substrates. The morphologies of the resulting films were investigated. The impact of the volume fraction of alcohol in the mixed solvents on the particle adsorption and fabrication of nanosphere assembled films was examined.     

Fuzzy矩阵方程的摄动问题

讨论了Fuzzy矩阵A的同解简化矩阵A^(2)，指出陈贻源论文《解Fuzzy关系方程》中定量3的错误。研究Fuzzy矩阵方程的摄动问题，解决了汤服成（2000）提出的未解决问题。     

C_nP_4~4(n=1～7)团簇结构与能量的密度泛函研究

使用分子图形软件设计出多种CnP-4(n =1～ 7)的结构模型 ,并进行B3LYP密度泛函几何构型优化和振动频率计算 .最稳定的CP-4和C2 P-3 都是平面环状结构 .最稳定的CnP-4(n =3 ,5 ,7)结构在直碳链的一端连接 1个磷原子且另一端是P3 C的四元环的平面结构 .最稳定的CnP-4(n =4,6)结构在直碳链的一端连接 1个磷原子且另一端是P3 的三元环的锄状结构 .直碳链可与平面环的磷原子生成大π键 .大多数构型是由C2 ,C3 ,C4子结构以环状或链状方式组成的 .碳原子与磷原子以交替方式排列的结构数量少、能量高 .     

O～3岁儿童微量元素检测及纠正150例观察与体会

对西安地区150例0～3岁儿童进行了六种微量元素：钙、锌、铜、铁、镁、硒的检测，发现微量元素缺乏可导致急慢性感染、免疫力低下、小儿营养不良、贫血、发育迟缓等症状。并对小儿营养不良、喂养不当进行矫正。其中铁、钙、锌同时缺乏占50％。     

相位共轭皮秒光脉冲的直接观察和记录

利用条纹照相机直接观察和记录了由全息相位共轭技术产生的相位共轭的皮秒光脉冲。实验结果与理论相符合。 关键词：     

La（NCS）3.4.5H2O和B15C5在乙醇中的相平衡及热化学研究

采用半微量相平衡方法测定了三元体系Ｌａ（ＮＣＳ）３．４．５Ｈ２Ｏ－Ｂ１５Ｃ５－Ｃ２Ｈ５ＯＨ在２９８．１５Ｋ的溶解度，测定了各饱和溶液的折光率。     

糠醛缩氨基硫脲合镍配合物的合成、晶体结构及表征

合成了糠醛缩氨基硫脲的Ni(Ⅱ)单核配合物,通过红外光谱、紫外光谱、X射线单晶衍射和热重-差热分析等手段对其结构进行了表征.单晶结构解析结果表明,标题化合物属于三方晶系,R3-空间群,晶胞参数为:a=1.4097(1)nm,b=1.4097(1)nm,c=2.0952(2)nm,α=90°,β=90°,γ=120°,V=3.6059(4)nm3,Z=9,Dc=1.638Mg/m3,μ=1.488mm-1,F(000)=1818,R1=0.0231,wR2=0.0619.配合物中镍离子采用4配位的平面正方形配位构型,晶体堆积中通过分子间氢键形成三维网状结构.     

甲酰胺对有序介孔二氧化硅形貌的影响

At room temperature and in acidic solution, ordered mesoporous silicas with particular morphology were synthesized using cetylpyridinium chloride as the template and formamide as the cosolvent. Scanning electron microscope (SEM), small angle X-ray diffraction (SXRD), and nitrogen adsorption techniques were used to characterize the as-synthesized and calcined samples. Results showed that the samples had hexagonal mesostructure analogous to MCM-41 and relatively narrow pore-size distributions (BJH). Besides, BET surface areas of the samples were in the range of 1 000～1 250 m²·g^-1 and high total pore volumes were up to 1.367 cm³·g^-1. Addition of formamide affected obviously mesostructures and the morphology of the mesoporous silica. Furthermore, with the increase of the concentration of formamide, the unit-cell constant decreased and particle shape changed from gyroids to fibers.